Kuka robot has already been used to chill casting operations. In the casting process, can be freely rotary drive device of water the bucket programming, and through the control for the shaft or an additional 6 axis of the robot.
load
Load 30 kg
The additional load of 35 kg
The scope of work
The maximum range of 2033 mm
Other data and specification
Shaft number 6
Repeat accuracy < plus or minus 0, 15 mm
Weight 665 kg
Installation location on the ground
Control system for KR C4
WELCOME VISIT OUR WEBPAGE!
Each of your recommendations is the most precious treasures！
